![](/images/new-backgrounds/1093531/93531109x1.webp)
2)Press the gasket into the channels on the three remaining sides of door.
Figure 6
3.Replace door frame cover
Starting at the top of the cover and working down, snap the cover back into door.
Figure 7
.
8-3 DOOR ALIGNMENT
If the space between your doors is uneven, follow the instructions below to align the doors:
1.With one hand, lift up the door you want to raise at the the middle hinge.
2.With the other hand, use pliers to insert the snap ring as shown.
3.Insert additional snap rings until the doors are aligned. (Three snap rings are provided with unit.)
Figure 10
8-4 FAN AND FAN MOTOR (EVAPORATOR)
1.Remove the freezer shelf.
2.Remove the plastic guide for the slides on left side by unscrewing the phillips head screws.
3.Remove the grille by removing one screw and pulling the grille forward.
4.Remove the Fan Motor assembly by loosening 2 screws and disassembling the shroud.
5.Pull out the fan and separate the Fan Motor and Bracket.
FAN MOTOR
BRACKET
MOTOR
FAN
GRILLE | Figure 11 |
- 55 -