5. Ice Plus Selection
Please select this function for quick freezing.
(1)The ICE PLUS option starts counting its
(2)The ICE PLUS function automatically turns off after
6. Dispenser Use Selection
You can select water or ice.
∗Select water, crushed ice, or ice cubes by cycling through the selections when pressing the DISPENSER button,
∗Hold your cup in the dispenser for a few seconds after dispensing
ice or water to allow the last pieces of ice or drops of water to fall into the cup.
7. Dispenser Light
Whenever the light button is pressed, the display changes as shown below.
Light Sensor
AutoAuto
on
Pressing
Switch
Normal status: When dispenser is operated, DISPENSER LIGHT is ON.
AUTO status: Detecting the lighting of room by LIGHT SENSOR, DISPENSER LIGHT is on and off automatically. ON status: DISPENSER LIGHT is on continuously.
8. Control Of Freezer Fan Motor
(1)Freezer fan motor has high and standard speeds.
(2)High speed is used at
(3)To improve cooling speed, the RPM of the freezer fan motor changes from normal speed to high.
(4)High speed (2700RPM) : Initial power on or load corresponding operation, Ice Plus
Normal speed (2400RPM) : General working conditions.
(5)Fan motor stops when a refrigerator or freezer door opens.
9. Cooling Fan Motor
(1)The cooling fan is switched ON and OFF in conjunction with the compressor.
(2)The cooling fan runs at a single speed.
(3)The Failure sensing method is the same as in the fan motor of the freezing fan motor(refer to failure diagnosis function table for failure display).
10. Icing Fan
The Icing Fan is controlled by the the sensor on the top of the ice room. 
The Failure sensing method is the same as in the fan motor of the freezer (refer to failure diagnosis function table for failure display)
- 6 -
