Printer Overview
Configuring printer settings
To set or change basic printer settings:
1.Press Home.
2.Press 
to select Printer Settings, then press OK.
3.Press 
to select one of the following settings:
• Date and Time
–Press OK, then press 
to select Year, Month, Day, Hour, or Minute. Press 
or 
to change the values; press OK when you are done.
NOTE: You can also synchronize the printer date and time to your computer using Home Center Software.
•Time to Low Power
To conserve energy, your printer will enter a low power (sleep) mode after being idle for a default delay time of 1 hour. You can increase the delay time to low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
–Press 
to change the time to
•Tagged Images Printing (see Printing tagged pictures, page 51)
–Press 
to select Off or On.
•Language
–Press OK, press 
to select a language, then press OK.
•Country/Region
–Press OK, press 
to select a country or region, then press OK.
•Reset All Settings (see Resetting factory defaults, page 95)
NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings.
•Printer Info
–Press OK to display the version of firmware that is currently running on your printer.
•Features Demonstration
–This feature is typically used by retailers to demonstrate the printer’s features.
4.Press Back to return to the Main Menu.
5 | www.kodak.com/go/aiosupport |
