Kodak 5.1 manual Scanning to a computer, Scan Settings Description

KODAK HERO 5.1 All-in-One Printer

Scanning to a computer

To scan to a computer:

1.Lift the scanner lid, and place the original face down in the right-front corner of the scanner glass, then close the lid.

2.Press to select Scan, then press OK.

3.Select Scan to Computer, then press OK.

4.Press to select an option, then press or to change the setting.

Scan	Settings	Description
Option
Scan To	USB-connected	The scanned file is sent to the USB-connected
	Computer	computer.
	(default)
	Name of computer	The scanned file is sent to the computer on the
	(only if a computer is	wireless or Ethernet network.
	connected by
	wireless or Ethernet
	network)
Scan What	Document	Sets the scan settings for scanning a document
	(default)	(see Changing the scan settings for scanning
		from the control panel, page 71).
	Photo	Sets the scan settings for scanning a picture
		(see Changing the scan settings for scanning
		from the control panel, page 71).

www.kodak.com/go/aiosupport 74