Kodak 9200 manual Using the LCD keyboard, Setting up an IP address

Networking Your Printer

Using the LCD keyboard

When you need to enter letters or numbers, a keyboard appears on the LCD.

•To change from uppercase to lowercase, select abc/123, then press OK.

•To change from lowercase to uppercase, select ABC/123, then press OK.

•To enter punctuation or symbols, select !@#, then press OK.

•To erase a character you entered, select BKSP, then press OK.

On the control panel, press , , or to select the letters and numbers, using the correct uppercase and lowercase letters. Press OK after each character. When you are done, select DONE, then press OK.

Setting up an IP address

IMPORTANT: You should only need to set up an IP address for your printer if you are having a problem with connecting. Typically, it is not necessary to set up an IP address. This procedure is for advanced users who know how to obtain the IP address for the printer.

All IP address entries have the following format: 000.000.000.000. Within each three-digit grouping, the number must be right-justified. If an address or subnet mask has only one or two characters between the periods, include one or two leading zeros in front of that number. For example:

The address as it may appear in your documentation

How to enter the address in the printer menu

149.89.138.149	149.089.138.149
149.2.40.149	149.002.040.149

For information about obtaining the printer IP address, go to

www.kodak.com/go/inkjetnetworking.

8 www.kodak.com/go/aiosupport