KODAK ESP 9200 Series
Using Quick Dial to send a fax
To send a fax using Quick Dial:
1.Press Phonebook.
2.Press the number on the keypad that corresponds to the desired Quick Dial entry.
3.Press Start Black to send a
Using the numeric keypad to send a fax
To send a fax from the numeric keypad:
1.Press Fax.
2.Enter a fax number using the numeric keypad.
3.Press Start Black to send a
Using the Redial button to send a fax
To send a fax to one of the last numbers dialed:
1.Press Redial.
2.Press 
to select an entry.
3.Press Start Black to send a
If there is no number to redial, the phonebook opens.
Receiving a fax
You can set up your printer to receive faxes automatically or manually. Even if your printer is set up to receive faxes automatically, you can still receive them manually at any time.
Receiving a fax automatically
To receive faxes automatically:
1.Load letter (8.5 x 11 in. / 22 x 28 cm) or A4 (8.3 x 11.7 in. / 21 x 30 cm) plain paper into the paper tray (see Loading plain paper in the main paper tray, page 17).
2.Make sure the Auto Answer LED is on. (If not, press Auto Answer to turn it on.)
The printer will receive all incoming faxes automatically.
www.kodak.com/go/aiosupport | 63 |
