Faxing

 

Fax Option

Settings

Description

 

 

 

 

 

 

Rings to Answer

1 to 6 (default is 4)

The number of times that your phone

 

 

 

will ring before the printer picks up the

 

 

 

call.

 

 

 

 

If you use a dedicated phone line for your

 

 

 

printer, set the Rings to Answer to any

 

 

 

setting. If the printer shares the phone

 

 

 

line with an answering machine, set the

 

 

 

Rings to Answer to a higher number (5

 

 

 

or 6) than the rings to answer for the

 

 

 

answering machine (typically 4 rings).

 

 

 

This allows the answering machine to

 

 

 

pick up phone calls. The printer will

 

 

 

monitor the line after the answering

 

 

 

machine picks up, and, if set to Auto

 

 

 

Answer, will detect an incoming fax and

 

 

 

receive it.

 

 

 

 

 

 

Redial if No Answer

Yes (default) / No

If the number you call is busy, the printer

 

 

 

will redial the number once

 

 

 

automatically.

 

 

 

 

 

 

Busy Redial

0 to 12

The number of times that the fax will

 

Attempts

(default is 5)

attempt to redial a busy number.

 

 

 

 

 

Disable Call Waiting

No (default) / Yes

If you have call-waiting service on your

 

 

 

phone line, you can disable it so that an

 

 

 

incoming call does not interrupt your fax

 

 

 

transmission.

 

 

 

 

Select Yes to disable call waiting, then

 

 

 

enter the call waiting disable code

 

 

 

(below).

 

 

 

 

 

 

Call Waiting Disable

*70 (default)

The printer automatically dials the call

 

Code

 

waiting disable code before dialing the

 

 

 

number to which you are sending a fax.

 

 

 

This code disables call waiting for the

 

 

 

duration of the fax, preventing incoming

 

 

 

calls from interrupting your fax

 

 

 

transmission.

 

 

 

 

The usual code to disable call waiting is

 

 

 

the default *70. If the call waiting disable

 

 

 

code is different in your area, press OK,

 

 

 

then press

to erase the current code.

 

 

 

Use the keypad to enter the correct

 

 

 

code, then press OK.

 

 

 

NOTE: You must enable call waiting

 

 

 

manually after your fax

 

 

 

transmission.

 

 

 

 

 

56

www.kodak.com/go/aiosupport

 

 

Page 62
Image 62
Kodak 9200 manual Printer, set the Rings to Answer to any