Konica Minolta 180 manual Criss Cross Sorting/Grouping, Mechanical Shift Sorting/Grouping

bizhub 180 Digital Technologies

2-in-1 and 4in-1 Copy Functions are possible via the electronic sorting feature. The 2-in-1 feature enables the bizhub 180 to make a side-by-side copy from two

1-sided originals. The 4-in-1 feature copies four different 1-sided originals onto one side of a single sheet of paper. It is also possible to make two-sided copies in the 2-in-1 and 4-in-1 modes.

CRISS CROSS SORTING/GROUPING

Criss Cross Sorting and Grouping is possible when the devices have paper loaded in the crosswise and lengthwise direction. The copy image can be digitally rotated to print multiple sets of copies stacked in alternating directions.

Criss Cross sorting is denoted when one set is stacked lengthwise on top of another set stacked crosswise. Each “set” is collated in the proper numerical order or as the original was placed on the document feeder for copying. If the original consists of 3 pages and 5 sets were requested, each of the five sets consists of pages 1, 2 and 3.

Criss Cross Grouping is when the copies are grouped lengthwise on top of another group stacked crosswise. Each “group” represents a page of the original copied. For example, if the original consists of 3 pages and 5 sets were requested, the first “group” would be 5 copies of page 1, the second “group” would be 5 copies of page 2 and the third group would be 5 copies of page 3.

MECHANICAL SHIFT SORTING/GROUPING

Shift Sorting and Grouping requires the optional SF-501 Shift Tray. Sorted copy sets are stacked in the same direction but arranged in a saw tooth style. This is accomplished via the optional SF-501 Shift Tray which shifts each copy set to the right or left. Shift Grouping copy sets are also arranged in a saw tooth manner.

Finishing Mode	Document Output Method
Sort	Shifts for every document set
Group	Shifts for each group of copies
Non-Sort	No shifting takes place. The order of the output is the same
	as Group Copy Mode.

42