Konica Minolta manual bizhub 180 Control Panel

bizhub 180 Control Panel

1 2 3 4

20

19

18

15

17 16 14 13 12

5 6 7 21 22 23

24

25

26

27

11 10 9 8

28

31 30 29

1Error Indicator

Flashes when an error has occurred.

2Printer Key/Indicator

Lights up while data is being printed from the computer and flashes while data is being sent. For details, refer to the Printer Controller User Manual.

3Status Key

Used to view the counters.

4Utility Key

Used to enter Utility mode and display the first Utility mode screen.

•MACHINE SETTING, PAPER SOURCE SETUP, USER MANAGEMENT, ADMIN. MANAGEMENT, COPY SETTING 1 & 2

5Display

Displays setting menus, error messages, and specified settings such as the number of copies and the zoom ratio.

6No Key

Erases the entered numbers and letters. Returns to the previous screen.

7Yes Key

Confirms the current setting.

8Auto Paper/Auto Size Key

Used to select between the Auto Paper or the Auto Size function.

9Zoom Key, and Keys

•Used to select a preset enlargement or reduction ratio.

•With each press, a zoom ratio between x 0.25 and x 4.00 is selected in 0.01 increments.

•Used to specify the selection above

or below in setting screens and menus.

10Paper Key

Used to select the size of the paper to be printed on.

11Auto/Photo Key, and Keys

•Used to specify the scanning density of copies.

•Used to specify the selection at the left or right in setting screens.

12Erase Key

Used to select the area of the document that is erased.

13File Margin Key

Press to select the “File Margin” function.

14Finishing Key

Used to select a copy “Finishing” function.

15X/Y Zoom Key

Used to specify different scaling proportions for the vertical and horizontal directions.

16Neg. Pos. Key

Press to make copies with the dark- and light-colored areas of the document inverted.

17Copy Key

Used to select between the “2-in-1” and the “4-in-1” copy functions.

18Copy Program Key

•Copy programs can be stored.

•Stored copy programs can be selected and recalled.

19Book Separation Key

Used to select the “Book Separation” function.

20Original Key

Used to select between the “Duplex Orig.” function and the “Mixed Orig.” function.

21Scan Key

Press to enter Scan mode. The indicator lights up in green to indicate that the machine is in Scan mode.

(Available only when the Network Card NC-502 and the Scanner Unit SU-502 are installed. Both scan kits require the respective fax kits installed).

22Fax Key

Does not function on this machine.

23Copy Key

Press to enter Copy mode. The indicator lights up in green to indicate that the machine is in Copy mode.

24Access Key

Used with user management.

25Energy Saver Key

Press to enter Energy Save mode.

26Interrupt Key

Press to enter Interrupt mode. The indicator lights up in green to indicate that the machine is in Interrupt mode.

Press again to cancel Interrupt mode and return to the mode before Interrupt mode was entered.

27123/ABC Key

Does not function on this machine.

28Panel Reset Key

•Cancels all copy functions and returns them to their default settings.

•Deletes all queued jobs.

29Stop Key

Stops the multi-page copy operation.

30Start Key

•Starts copying.

•Queues a copy job if pressed while the machine is warming up.

•The indicator lights up in green to indicate that the machine is ready to start copying, or it lights up in orange to indicate that the machine is not ready to start copying.

3110-Key Pad

•Used to specify the number of copies.

•Used to enter setting values.

•The [*] and [#] keys do not function on this machine.

59