VOICE MEMO
Voice memo allows up to fifteen seconds of audio to be recorded with a still image. The function is activated in section 2 of the recording menu (p. 80) and is used in unison with instant playback. When the function is active, the microphone indicator is displayed on the monitors. Voice memo must be set before taking a picture. It will remain in effect until reset.
|
| Int. set | – |
|
| Bracket set | Off |
Data imprint | Off | ||
|
| Imprint to | Image + Exif |
|
| ||
Inst.playback | 10 sec. | ||
|
| Voice memo | On |
Recording audio. 
:stop
After the instant playback period, a screen will appear indicating the audio recording has started. A status bar will display the amount of recorded time. The recording will stop when the fifteen second recording period has ended or by pressing the center button of the controller.
A voice memo is attached to the last image of a
Microphone | Recording Tips |
| When making audio recordings, be careful not to touch or |
| cover the microphone. The quality of the recording is |
| proportional to the subject to microphone distance. For |
| best results, hold the camera approximately 20cm (8in) |
| from your mouth. |
| During instant playback, if the central button of the |
| controller is pressed, the image is saved and the voice- |
| memo recording starts. If the |
| pressed partway down, the image is saved and the voice- |
| memo recording is canceled. |
101 
