Konica Minolta A2 instruction manual Spot AE Area, Direct Manual Focus

SPOT AE AREA

When using spot metering (p.
69) with the Flex Focus Point
(p. 48), the position of the spot
metering area can be specified
at the center of the live image
or linked to the Flex Focus
Point; the spot moves after the
position of the FFP is set. This
is set in section 4 of the	Center spot	With Flex Focus Point
recording menu (p. 80).

DIRECT MANUAL FOCUS

Direct manual focus allows manual adjustments to be made after the AF system has locked onto the subject. Direct manual focus is activated in section 4 of the recording menu (p. 80). Direct manual focus is canceled when continuous AF or manual focus (p. 46) is in use.

As described in the basic recording operation section (p. 33), press the shutter-release button partway down to lock the focus (1); the focus signal will turn white. “DMF” will be displayed next to the drive-mode indicator.

While holding the shutter-release button partway down, the camera can be manually focused with the focusing ring (2). Always use the monitor image to confirm focus. The approximate focusing distance is displayed next to the frame counter. If active, the Flex Digital Magnifier (p. 105) can be used.

1

2

107