Compose the picture as described in the basic recording

1

section (p. 33). Press and hold the shutter-release button all

 

the way down (1) to make the bracket series; three

 

consecutive images will be captured. If single-frame advance

 

bracketing is selected, the shutter-release button must be

 

pressed for each exposure. If set to continuous AF (p. 46), the

 

camera will continue to focus during a continuous bracket.

 

 

 

Normal

 

 

Under

 

Number of frames in

Over

 

 

 

bracketing series

 

 

Frame counter

0.3 Ev

 

bracket

 

 

 

When using flash, TIFF, or RAW & JPEG, single-frame advance is employed. To make a flash bracket, raise the camera flash; the ambient exposure is not bracketed.

When exposure brackets are made in S exposure mode, the aperture controls the bracket. In A and M modes, the shutter speed controls the bracket; in M mode, pressing the exposure-compensation button during the bracket changes the exposure control to the aperture. The camera uses both the aperture and shutter speed control the bracket in P mode.

With a Digital Effect bracket, if the contrast or color saturation is set to the maximum or minimum level (±5), one bracket will be made at ± 6: +5, +4, +6. A RAW image cannot exceed the maximum and minimum levels and will contain two identical brackets: +5, +4, +5. A black and white Filter bracket is made to the settings before and after the set Filter (p. 79). If Filter 10 is selected, the bracket series will be 10, 9, 0.

63

Page 63
Image 63
Konica Minolta A2 instruction manual Normal Under