INTERVAL SETUP
The parameters for the interval drive mode (p. 66) are set in section 2 of the recording menu (p. 80).
|
| Int. set | Enter |
| |
|
| Bracket set |
|
|
|
|
| Int. set |
|
|
|
|
|
|
|
| |
| Interval |
| 1 min |
| |
| No.of frames | 2 |
| ||
| Start time |
| No delay |
| |
|
| :enter |
|
|
|
Select “Enter” in the
On the setup screen, use the up/down controller keys to highlight the parameter to be changed and then press the right controller key. Use the up/down keys to change the parameter. Use the left controller key to return to the parameters. Continue until the parameters are set.
Press the center of the controller to complete the operation. The menu button closes the screen and cancels any changes.
BRACKETING SETUP
When making an exposure bracket (p. 62), the exposure difference among frames can be set to 0.3EV or 0.5Ev. This is set in section 2 of the recording menu (p. 80).
Normal
Under
Over
0.3Ev bracket
0.5Ev bracket
96
RECORDING MENU
