ATTACHING THE LENS HOOD
The lens hood is used to control stray light from entering the lens and causing flare. When using the camera under bright light, the use of
1 the lens hood is recommended. The lens hood should not be used with the
To mount the lens hood, align the rectangular dimple on the rim of the hood with the
Slide the hood onto the end of the lens and
2 turn it 90° clockwise until it clicks and the circular dimple is aligned with the
The lens hood can be reverse mounted when the camera is not is use.
With one of the large petals to the top, slide the hood onto the end of the lens. Turn it 90° clockwise until it it clicks into place.
The lens hood can be attached or removed with the lens cap on the camera. To detach the lens hood, turn it 90° counterclockwise and remove.
21