Konica Minolta A2 instruction manual Movie Recording

MOVIE RECORDING

1	Set the mode switch to the movie-recording position (1).
	Before recording, the data-panel and monitor frame
	counters show the maximum time in seconds that can be
	recorded. The length of the movie clip depends on the
	image size and frame rate, and the space available on the
	memory card. The maximum recording time is 6 minutes
	with 544x408 30fps movies or 15 minutes with other size
	and frame-rate combinations; low light levels can shorten
	this time. Image size and frame rate is selected with the
	movie menu (p. 112). For more on movie recording, see
	page 114.
	Place the subject in the center of the live image and press
	the shutter-release button partway down to set the focus.
	Use the focus signal to confirm focus.

Image size

Frame rate

Focus signal

Total recording time for the next movie clip.

Press the shutter-release button all the way down and release to start recording. The camera will continue to record until the recording time is used or the shutter- release button is pressed again. When recording, the monitor frame counter and status bar shows the recorded time.

Recording time in seconds

Recording indicator

38BASIC RECORDING