Konica Minolta C20 manual Scanning With the Machine, 174

Scanning With the Machine

The machine keys can be used to make scans. This operation differs from scanning from a computer application since the destination of the scan data can also be specified.

" Before scanning, check that the Scan key is lit up in green. If the key

is not lit up in green, press the Scan key to enter Scan mode.

" If, while specifying settings, no key is pressed for the length of time specified for AUTO PANEL RESET, the entered settings are can- celed and the main screen (Scan mode) is displayed.

Basic Scanning Operation

1 Position the document to be scanned.

" For details on positioning the document, refer to “Placing a document on the original glass” on page 135 and “Loading a document into the ADF” on page 136.

2 Press the Scan key to enter Scan mode.

174 Scanning With the Machine