Konica Minolta C20 manual Solving Other Problems 277

Symptom	Cause	Solution
You are	Media or settings are	Make sure that you are using correct
experienc-	not correct.	media.
ing duplex		„ See “Specifications” on page 106.
problems.
		Also, refer to
		http://printer.konicaminolta.com
		for a complete list of currently
		approved media.
		„ Do not duplex custom-sized media,
		envelopes, labels, postcards, thick
		stock, letterhead, glossy media, or
		transparencies.
		„ Make sure that you have not mixed
		media types in the tray.
		In the Windows printer driver (Layout/
		Print Type), choose "Double-Sided."
		Set duplex (Double-Sided) copying.
		For details on setting duplex (Dou-
		ble-Sided) copying, refer to “Setting
		Duplex (Double-Sided) Copying” on
		page 163.
		For N-up on duplexed pages, choose
		Collate only in the printer driver’s Basic
		Tab. Do not set collation in the applica-
		tion.
It takes a	The response time	Wait until the transfer is finished.
very long	may be slow depend-
time to trans-	ing on the USB mem-
fer scan data	ory device that is
to the USB	used.
memory
device.
It is not pos-	An error has occurred	Correct the cause of the error, and
sible to enter	in Copy mode.	then enter a different mode.
Scan mode
or Fax mode.
With N-up on	Both the printer driver	For N-up on multiple copies, choose
multiple cop-	and the application	Collate only in the printer driver’s Basic
ies, the out-	have been set for col-	Tab. Do not set collation in the applica-
put is	lation.	tion.
incorrect.

Solving Other Problems 277