Konica Minolta C20 manual Maintaining the Machine 233

„Do not cover the machine immediately after using it. Turn it off and wait until it cools down.

„Do not leave the machine’s covers open for any length of time, especially in well-lit places; light may damage the toner cartridges.

„Do not open the machine during printing.

„Do not tap media stacks on the machine.

„Do not lubricate or disassemble the machine.

„Do not tilt the machine.

„Do not touch the electrical contacts, gears, or laser devices. Doing so may damage the machine and cause the print quality to deteriorate.

„Keep media in the output tray at a minimum level. If the media is stocked too high, your machine may experience media misfeeds and excessive media curl.

„Make sure two people are avail- able to lift the machine when moving it.

Keep the machine level to avoid toner spillage.

55kg

121 lbs

„ When lifting the machine, fold up Tray 1 and remove the output tray, and then lift the machine as shown in the illustration at the right.

„If the output tray and lower feeder unit are installed, remove them from the machine and move each part separately.

„If you get toner on your skin,

wash it off with cool water and a mild soap.

CAUTION

If you get toner in your eyes, wash it out immediately with cool water and consult a doctor.

„Make sure any parts removed during cleaning are replaced before you plug in the machine.

Maintaining the Machine 233