Konica Minolta C20 manual Scanning With the Machine 175

3 Specify the desired scan settings.

" For details on specifying the destination of the data, refer to “Spec- ifying the Data Location” on page 176 and “Specifying the Destina- tion Address (Scan to E-mail/FTP/SMB)” on page 178.

For details on selecting the data format, refer to “Selecting the Data Format” on page 193.

For details on selecting the scan quality setting, refer to “Selecting the Scan Quality Setting” on page 193.

For details on setting duplex (double-sided) scanning, refer to “Setting Duplex (Double-Sided) Scanning” on page 194.

For details on setting the scan size, refer to “Setting the Scan Size” on page 195.

For details on setting the color of the scan data, refer to “Setting the Scan Color” on page 195.

For details on specifying the subject when sending data, refer to “Specifying the Subject” on page 195.

4 To scan color scans, press the Start-Colorkey. To scan monochrome scans, press the Start-B&Wkey.

If the document was loaded in the ADF, scanning begins, and then the data is sent to the specified location. If the document was placed on the original glass, continue with step 5.

" When scanning with the Scan to PC operation, select in the dialog box appearing on the computer screen the connection method that is used (USB or network).

5 When NEXT PAGE? appears in the message window, place the second document page on the original glass, and then press the Select key.

" When scanning with the Scan to PC operation, a multi-page docu- ment cannot be scanned with the original glass. To scan a multi-page document, load the document into the ADF.

6 Press the + or , key to select the size of the document positioned in step 5, and then press the Select key.

7 After all document pages have been scanned, press the Start key. The scanned document is sent to the specified location.

" If the Stop/Reset key is pressed while scanning, JOB CANCEL appears. To continue scanning, select NO. To stop scanning, select YES.

" To cancel a job where scanning was finished and the data is queued to be sent, refer to “Deleting a Queued Transmission Job” on page 196.

Scanning With the Machine 175