Konica Minolta C20 manual Status, Error, and Service Messages 289

This message...	means...	Do this...
PC CONNECTION FAILED	While data was	Check the connection
	being sent in Scan	with the computer and
	mode, the connec-	the scanner driver sta-
	tion to the computer	tus, and then try send-
	was interrupted.	ing the data again.
COMMUNICATION ERROR	While data was	Check the connection
USB Memory	being sent in Scan	to the USB memory
	mode, the connec-	device, and then try
	tion to the USB	sending the data
	memory device was	again.
	interrupted.
COMMUNICATION ERROR	While data was	Check the settings in
xxx Server	being sent in Scan	the NETWORK SET-
	mode, the connec-	TING menu, and then
	tion to the server	try sending the data
	was interrupted.	again.
DISCONNECT	The connection to	Check the connection
USB Memory	the USB memory	to the USB memory
	device was inter-	device, and then try
	rupted.	sending the fax again.
DISCONNECT	The connection to	Check the settings in
xxx Server	the server was inter-	the NETWORK SET-
	rupted.	TING menu, and then
		try connecting again.
Fuser Unit Life	The time to replace	Replace the fuser unit.
	the fuser unit has
	been reached.
HOLD JOB ERROR	The hard disk kit is	To store jobs, install
UNABLE TO STORE JOB	not installed on the	the optional hard disk
	machine so a job to	kit on the machine.
	be stored could not
	be received.
HOLD JOB ERROR	Since the memory is	Create free space on
MEMORY FULL	full, stored jobs can-	the memory, and then
	not be printed.	try printing the stored
		jobs again.
HOLD JOB ERROR	Since Tray 3 is not	To print the jobs, install
NO TRAY3	installed, stored	Tray 3, and then try
	jobs cannot be	printing the stored jobs
	printed.	again.

Status, Error, and Service Messages 289