Konica Minolta C20 manual OFF / on, Disable / Enable

" Manufacturer’s default settings appear in bold.

ADMINISTRATOR NO.			Specify the new administrator access
			code.
REMOTE MONITOR			Setting	OFF / ON
			Select whether or not setting remote
			monitor.
			If ON is selected, technical support can
			access the menu mode.
			If OFF is selected, technical support
			cannot access the menu mode.
			" This setting is for technical
			support uses. Change the setting
			only when it is necessary.
NETWORK	TCP/IP		Setting	DISABLE / ENABLE
SETTING
			Select the setting for connecting to this
			machine through a network.
	IP ADDR. SET-		Setting	AUTO / SPECIFY
	TING
			Set the IP address of this printer on the
			network.
			If AUTO is selected, the IP address will
			be assigned automatically.
			If SPECIFY is selected, manually spec-
			ify settings for IP ADDRESS, SUB-
			NET MASK and GATEWAY.
	DNS	DNS	Setting	DISABLE / ENABLE
		AUTO
			Select whether or not the DNS server
		SET-	address is automatically assigned by
		TING	the DHCP server.
		SPEC-	Specify the DNS server address (up to
		IFY	three addresses).
			The default setting is “0.0.0.0”.
	DHCP		Setting	DISABLE / ENABLE
			If there is a DHCP server on the net-
			work, specify whether the IP address
			and other network information is auto-
			matically assigned by the DHCP server.

Configuration Menu Overview 47