Konica Minolta C20 manual Physical TRAY1, Physical TRAY2

TRAY	TRAY MAPPING	Setting	ON / OFF
MAPPING	MD.
		Select whether or not the Tray Mapping
		function is used.
	LOGICAL TRAY	Setting	PHYSICAL TRAY1 /
	0-9		PHYSICAL TRAY2 /
			PHYSICAL TRAY3
		Select the tray that is used for printing
		when a print job is received from
		another manufacturer's printer driver.
		The default settings are PHYSICAL
		TRAY1 for LOGICAL TRAY1 and
		PHYSICAL TRAY2 for other trays.
		" PHYSICAL TRAY3 appears
		only if an optional lower feeder
		unit is installed.
DUPLEX		Setting	OFF / LONG EDGE /
			SHORT EDGE
		If LONG EDGE is selected, the pages
		will be printed on both sides of the
		paper for long-edge binding.
		If SHORT EDGE is selected, the pages
		will be printed on both sides of the
		paper for short-edge binding.
		The setting specified in the printer driver
		will override this menu setting.
COPIES		Setting	1 to 9999 (Default: 1)
		Specify the number of copies to be
		printed.
		The setting specified in the printer driver
		will override this menu setting.
COLLATE		Setting	ON / OFF
		Select whether or not to enable collated
		(sort) printing.
		The setting specified in the printer driver
		will override this menu setting.

PS/PCL PRINT Menu 73