Inserting/Removing Cards
-Use the bundled SD Memory Card or a commercially available memory card.
If you wish to use an aftermarket card, any of the following are appropriate: SD Memory Card,
-First, turn OFF the main switch (lens cover closed), make sure the LCD monitor is OFF and turn OFF all power. If power is ON, damage may occur to the card or to the camera itself.
| Inserting a Card |
|
1 | 1. | Open the battery/card cover. |
2 |
|
|
Memory Stick slot
SD Memory Card/MultiMedia
Card slot
2.With the camera and the label of the card facing up, insert the card with the knocked out part first into the slot and push in until a click is heard.
•Take care that the card is inserted facing the right way. If the card is forcefully inserted facing the wrong way, it will damage the connector.
•There are two card slots. When a SD Memory card or MultiMedia Card are used, insert them in the slot at the back of the camera, and if a Memory Stick is used, insert it in the slot toward the front.
3.Close the battery/card cover.
26