Using the Set-up Menu (Cont’d)

Resetting the file number

- The setting method of file numbers can be changed.

*NUMBER RESET OFF (default setting)

Consecutive file numbers are assigned as shown below. (The file numbers are continued if a new card is inserted.)

XXXX1.jpg, XXXX2.jpg, XXXX3.jpg…

*NUMBER RESET ON

Each time a new card is inserted, numbers are assigned starting from XXXX1.jpg. If a card that already contains images is inserted, the assigned file numbers continue on from the existing numbers already on the card.

Changing Auto-Exposure (AE) Modes

-Your camera uses center-weighted metering as the default, but it can be changed to spot metering.

-Spot metering is used to ensure matching the exposure to a targeted part of your subject.

*Center-weighted metering (AE CENTER)

In this mode the camera sets the exposure according to the metering for the central part of the whole frame. It is ideal for taking photos where the brightness of the subject in the center of the frame is desired.

*Spot metering (AE SPOT)

In spot metering the camera measures the light of just the subject in the center of the frame, and sets the exposure to it. This mode is ideal when the background of the picture is brighter than the subject, or there is a great deal of contrast between the two, as the camera allows you to take the photo with the exposure set to the brightness of your desired subject.

115

Page 115
Image 115
Konica Minolta KD-420Z Resetting the file number, Changing Auto-Exposure AE Modes, Number Reset OFF default setting