Konica Minolta KD-420Z user manual Using the Play Menu Cont’d

Using the PLAY Menu (Cont’d)

6

6. The “SELECT SET” screen appears. Use the or button to select “LAST SET FILE READ” or “INIT. VAL. <0>” and then press the SET/DISP. button.

•If you do not want to specify any DPOF settings, select “CANCEL” and press the SET/DISP. button.

• By selecting “LAST SET FILE READ”, you can re-use the file containing the previous print settings. If the previous settings are not stored in a file, this option is grayed out and cannot be selected. In this event, select “INIT. VAL. <0>”.

• By selecting “INIT. VAL. <0>” and pressing the or button, you can reset all the frames to their default values beforehand.

7

7. An 8-frame image is displayed.

Use the , , or buttons to move the red frame around the screen. Using the red frame to select an image allows you to change or set (or cancel) the DPOF settings for the image.

-Images for which prints have been specified are surrounded by a yellow frame and the number of prints specified is shown in the top-left corner of the image. By using the red frame to select an image and pressing the zoom buttons (T and W), you can increase or decrease the number of prints.

-If you use the red frame to select an image with no prints specified and then press the SET/DISP button, the number prints for that image is set to 1. You can then use the zoom buttons (T and W) to increase or decrease the number of prints.

• If you press the	button at the first frame or the	button at the last frame, the
screen changes to show the previous 8 frames or next 8 frames.
8. To exit the selection screen, use the , ,		or button to select “END”

and then press the SET/DISP. button. (Proceed to p.100-10.)

99