Kyocera FS-1020MFP manual Operation Panel, Printing the Status Page on, ID Card Copy key, Scan key

Machine Parts

Operation Panel

[ID Card Copy] key	Displays the ID Card Copy
	screen.
[Copy] key	Displays the Copy screen.
[Scan] key	Displays the Scan screen.
[Print Box] key	Displays the Print Box screen.

Mode Select key	• Set the mode to Copies,
	Density, or Program.
	• Press and hold for 5 seconds to
	print the status page. Refer to
	Printing the Status Page on
	page 2-42.
Copies indicator	Lights up when Copies is selected.
	Enter the number of copies.
Density indicator	Lights up when Density is selected.
	Adjust the copy density.
Program indicator	Lights up when Program is
	selected. Select the program
	number.

Display	• Displays numerical values and
	settings such as the number of copies,
	and error codes.
	• When the machine is in sleep mode,
	--is displayed.
[] key / [] key	Increments/decrements numbers in the
	display.
[Stop/Reset] key		• Cancels the printing job in progress.
		• Returns settings to their default states.
		• Hold down two seconds to pause printing. Hold down two seconds again to
		resume printing.
[Start] key		Starts copying and scanning operations.
Processing Indicator (Green)		Flashes when the machine is processing data.

Attention Indicator (Amber) Lights or flashes when an error occurs.

[Quiet Mode] key	Turns on Quiet Mode.
	Quiet Mode
	If you prefer quiet operation, press [Quiet Mode] to turn on Quiet Mode. When Quiet
	Mode is on, the print speed is slower.

1-4