Kyocera FS-1020MFP, FS-1220MFP manual Device Defaults Tab

Preparation

Device Defaults Tab
	1			2
	4			3
				7
	5			8
	6
	9			10
	12			11
				14
	13			15
No.	Item	Description
1	Power off timer	Select the length of time before the machine shuts off automatically when not in use.
		The default preset time is 1 hour.
		Value: 1 to 6 hours, 9 hours, 12 hours, 1 day to 1 week
		Also, selects whether or not to turn the power off automatically when a USB is
		connected.
		Note Power off when does not appear on the FS-1020MFP for Europe, Russia, Africa
		and Middle East, and FS-1220MFP for Europe.
2	Auto sleep	Set the sleep timer for the machine to go into sleep mode when not in use. The default
		preset time is 1 minute.
		Value: 1 to 240 minutes (1 minute increments)
3	Quiet mode	Turn on Quiet Mode. Refer to Quiet Mode on page 1-4.
4	Units	Select Inches or Millimeters for the unit for paper dimensions.
5	Print density	Adjust density using 5 levels.
		Value: Light, Medium light, Normal, Medium dark, Dark
6	Panel options	Opens Panel options screen.
			• Default screen: Select the screen appearing right after
			start-up (default screen).
			Note To enable the change immediately, turn the
			machine OFF and then ON. Otherwise wait until the
			machine once enters the sleep and then resumes.
			• Reset panel: If no jobs are run for a certain period of
			time, automatically reset settings and return to the
			default setting. If you select On for Reset panel, set the
			amount of time to wait before Reset panel.

2-38