Kyocera FS-1020MFP, FS-1220MFP manual Printing from Application Software, About GX Driver

Printing

Printing from Application Software

The steps required to print a document created with an application are explained below. You can select the printing paper size.

Note You can also select the various settings by clicking Properties to open the Properties screen. Refer to About GX Driver.

1Load the paper required into the cassette.

2From the application File menu, select Print. The Print screen appears.

3Click the drop-down list of printer names. All the installed printers are listed. Click the name of the printer.

4Use Number of copies to enter the number of copies required. Up to 999 copies can be printed. For Microsoft Word, we recommend that you click Options and specify Use printer settings for the Default tray.

5To start printing, click OK.

About GX Driver

GX Driver consists of the following tabs.

Tabs	Description
Quick Print	Use this tab to define basic print options into group profiles that
	can be accessed quickly and easily.
Basic	Use this tab to select the page size and orientation. The paper
	source is also selected.
Layout	Use to create multiple pages on a single sheet of paper. Also
	contains the scaling option.
Imaging	Select this tab to change the print quality and graphic settings.
Job	Use to save a print job in a Print Box. Refer to Print Box on
	page 4-5.
Advanced	Use to set up and add watermarks to your output.

4-2