Kyocera FS-1020MFP manual Default and Program Settings, Configuration on page, Default Settings

Preparation

Default and Program Settings

This section explains about the Copy, Print Box, and Scan default settings and programs. For settings that are frequently changed from the default settings, it is convenient to register a program.

Default Settings

This section explains the default settings for each function.

Functions	Description
Copy	The default settings for Copy are changed with the Configuration. For details, refer to
	Configuration on page 2-36.
Print Box	It is not possible to change the default settings for Print Box. The job stored in the Default
	folder is printed. The Program is used to select the Print Box. Refer to Program Settings on
	page 2-28.
Push Scan	It is not possible to change the default settings for Push Scan. The Program is used to change
	the settings. Refer to Program Settings on page 2-28.

Program Settings

If you have settings that are frequently changed from the default settings, register the settings in a program. You can simply select the program number as needed to recall those functions.

Programs can be registered from a computer using Preset Tool. The Preset Tool is a function of KYOCERA Client Tool. Three programs can be registered per function.

This section explains how to register a program. To use a registered program, refer to the pages of each function.

•Copy: Basic Operation on page 3-2

•Scan: Push Scan on page 5-2

•Print Box: Printing from Print Box on page 4-6

Accessing the Preset Tool

1Start KYOCERA Client Tool as explained in Accessing KYOCERA Client Tool on page 2-22.

2Click Preset on the Device tab. The Preset Tool opens.

2-28