Printing a List of Data Names, List Partitions | Kyocera FS-1900

Operating the Storage Device

When the formatting is successfully completed, the printer automatically prints out a format information page as shown below.

FS-1900 Page Printer

FORMAT INFORMATION

Capacity. The total size of the CompactFlash card or the Microdrive memory. Used Space. The size the printer uses for its system.

Free Space. The size remaining in the CompactFlash card or the Microdrive for storing data.

When the format information is printed, the message display returns to

Ready.

Printing a List of Data Names

The printer prints a list of all data names (referred to as partitions) stored in the storage device for reference. (Printing a list is also available for a font card.)

To print a list of data names for the CompactFlash card, the Microdrive, or the RAM disk proceed as follows.

1

2

Press the MENU key.

Press the or key repeatedly until Memory Card >, Hard Disk >, or RAM Disk Mode > appears.

	Memory Card	>
3	Press the > key.
4	Press the or key repeatedly until >List of Partitions
4	appears.

>List of

Partitions

1-89

Image 103

Kyocera FS-1900 manual Printing a List of Data Names, List Partitions

Contents

FS-1900 Regarding Tradenames General Limited WarrantyLicense Limitation of Remedies Agfa Japan License Agreement Typeface Trademark Acknowledgement Contents Contents Paper Selection MaintenanceChapter Appendix a Appendix B TroubleshootingFonts Options Appendix C Host Computer Interface Glossary Glossary-1 Index Index-1 Introduction Features Display of printer messages in any of five languages Prescribe Command LanguageWide Variety of Available Fonts Job Retention Guide to the Operation Guide For More Information Glossary Appendix D SpecificationsAppendix B Options Appendix C Host Computer Interface Using the Operator Panel Message Display Understanding the Operator PanelMessage Meaning Paper Size Indicator Interface IndicatorMessage Paper Size Display Message Display Paper Type Paper Type IndicatorREADY, DATA, and Attention Indicators Indicator Description Key Function Keys Menu System Road Map Over operator panel settings TCP/IP IBM Understanding the Operator Panel Heavy Thick Light Thin Duplex Path Enable Disable Understanding the Operator Panel Print Menu Map ? Printing Test PagesMenu Map Print Menu Map Sample Menu MAP Menu MAP Print Status StatusPrint Status Page ? Status Hardware Information Installation OptionsError Log Software Version KIR Test Pattern Interface Information Service Service StatusOthers Network Card Interface Status Opt. StatusPage ? On Opt. StatusPage ? Off List Font ListsFont Font Select Internal Font Lists Processing Waiting Received Data DumpingPrint HEX-DUMP Print HEX-DUMP? Setting the Paper Size in Paper Cassette Setting the Paper SizePaper Handling Custom Paper Size Paper Handling Unit Cassette SizeUnit ? mm Dimension Dimension 216 mm MP Tray Size Setting the Paper Size in MP TrayMP Tray Size ? A4 Changes as shown below Cassette Type ? Plain Setting the Paper TypeSetting the Paper Type in Paper Cassette Cassette Type Plain MP Tray Type Plain Setting the Paper Type in MP TrayMP Tray Type ? Plain Custom Paper Type Type Adjust Custom Paper Handling Paper Weight ? Normal Paper Weight NormalSetting the Paper Weight Duplex path ? Enable Duplex path EnableSetting the Duplex Path Reset Type Adjust ? Reset Type AdjustResetting the Custom Paper Type MP Tray Mode Cassette MP Tray Mode Feed Select ? Cassette MP Tray Mode ? CassetteSelecting the Paper Feed Source Feed Select Cassette Stack Select Face-down tray Output StackStack Select Override A4/LT Off Overriding A4 and Letter Size DifferenceOverride A4/LT ? Off Changing the Emulation PaginationEmulation Emulation ?PCL Alt. Emulation ?PCL EmulationAlternative Emulation for Kpdl Emulation ?KPDL Printing Kpdl Errors Print Kpdl Errs ? On Default fontFont ?I000 I000Letter Description Size Points Default Font SizeSize Courier ? Regular Courier RegularChanging Type for Courier/Letter Gothic Pitch 10.00 cpi Setting the Character Pitch for Courier/Letter GothicPitch Code Set Code SetCode Set ?IBM PC-8 Set Number of CopiesCopies 001 Orientation Portrait Printing OrientationOrientation ? Portrait Status KIR Checking Lines KIR Kyocera Image Refinement KIR Mode ? On KIR ModePrint Quality Ecoprint Mode ? Off Ecoprint Mode OffEcoprint Resolution Fast 1200 mode ResolutionResolution MPS Mode Quick Copy Proof and Hold Private Print Stored Job Job Storage Printing Additional Copies using Quick CopyQuick Copy MPS Arlen ?Report Quick Copy HaroldQuick Copy Quick Copy ?Arlen Printing Remaining Copies of a Proof and Hold Job Report DeleteProof and Hold Deleting a Quick Copy Job Quick Copy Harold Private/Stored ?Arlen Printing a Private JobPrivate/Stored Harold Private/Stored ?Harold Deleting a Private Job AgendaAgenda Copies Agenda Delete Releasing a Stored Job Storing a Print Job Deleting a Stored Job Agenda Copies 001 Finish Printing a Code Job MPS List Code JOB Printing a List of Code JobsList Code JOB ? Print VMB Data Tray001 Retrieving Jobs from Virtual Mailbox VMBTray001? List of VMB Printing a List of VMBList of VMB ? MPS Configuration MPS Configuration Maximum Space Assigned to Temporary Code Jobs Temp. Code JOB Size 050MB Size 05 0MB Perm. Code JOB Size 050MBMaximum Space Assigned to Permanent Code Jobs VMB Size VMB Size 050MBMaximum Space Assigned to Virtual Mailboxes Interface Parallel Interface Mode Parallel I/F USB Interface ModeInterface Interface ? Serial Serial Interface Parameters Lower the baud rate Baud Rate Network Interface Parameters EtherTalk Off Opt. StatusPage On NetWareRange Dhcp Off IP Address 000.000.000.000 Subnet Mask Gateway Operating the Storage Device RAM Disk Mode OffActivating the RAM Disk RAM Disk Size Mbyte RAM Disk Mode ? OnEnter key Read Data ?data name Reading DataMemory Card Read Data Data name Formatting a new Microdrive Writing DataWrite Data Write Data ? Write Information Delete Data Data name Deleting DataDelete Data ?data name Read fonts Reading Fonts from a CompactFlash CardRead fonts ? Format Formatting a Storage DeviceFormat ? List Partitions Printing a List of Data Names Partition List List Partitions ? Protect ? On ConfigurationProtect Mode Protect LF Action ? LF only Protect ? AutoLinefeed LF Action LF Action LF only CR Action CR only Carriage-Return CR ActionCR Action ? CR only Wide A4 Off Wide A4 PitchWide A4 ? Off Print Density Print Density Life Counters Toner Counter ResettingNew Toner Installed Total Printed Pages MSG Language ? English New Toner Installed ?Message Language MSG Language English Following order The key cycles in the reverse order Form Feed Automatic Form Feed Timeout Sleep Timer 015 min Sleep Timer SettingSleep Timer Turning Off the Sleep Timer Sleep ModeSleep Mode ? On Sleep Mode ? Off Self test Please wait Ready Printer ResettingPrinter Reset Printer Reset ? Resource Prot Off Resource ProtectionResource Prot ? Off Buzzer Alarm Buzzer SettingBuzzer ? On Auto Continue Mode On Auto Continue SettingAuto Continue Mode ? On Setting the Auto Continue Recovery Time Auto Continue Timer Paper Selection Paper Availability Paper SpecificationsSpecification General Guidelines Condition of the Paper Selecting the Right PaperComposition Multi-purpose tray Size Cassette or multi Purpose tray Basis WeightPaper Size Smoothness Weight g/m² Paper Weight Equivalence TableMoisture Content Bond Weight lb Europe Metric Other Paper Properties Paper Grain Transparency Overhead Projection Film Special PaperPaper type Media type Adhesive-Backed Labels Colored Paper EnvelopesPreprinted Paper Recycled Paper Paper Type Maintenance Toner Container Replacement Interval Toner Container Replacement Keep the toner container as level as possible while removing Replenishing Toner Carefully remove the protective seal orange colored Push Here Replacing the Waste Toner Box Waste Toner Box Replacement Cap the waste toner box after removing from the printer Toner Counter Resetting on Cleaning the Charger Wire Cleaning Cleaning the Charger Grid Cleaner is not re-usable Paper Transfer Unit Ramp using the wiper cloth included in the toner kit Troubleshooting General Guide Symptom Check Items Corrective Action Print Quality Problems Check the print density Check the Ecoprint settingCheck the charger unit installation Check the operator panel Check the transfer roller Check the paper chute and the rampCheck the file or program Indicators Indicators and MessagesIndicator Name Condition Description Message Corrective Action Maintenance Messages Key. See Correcting a Paper Jam on Hardware compatible with the FS-1900 See Operating the Storage Device on Error Messages From the operator panel, and re-select Auto Beginning to ensure correct reading of the memory card Paper jam Description Reference Message Location Correcting a Paper Jam Online help messages Jam recovery Paper jam Cassette Jam at the Paper Cassette or Inside the PrinterHelp Start -- Press ? key Shown in B Paper jam Duplexer Help Start -- Press ? key Paper Jam at the Option Duplexer Remove the jammed paper Paper jam Sorter Paper Jam at the Option Sorter Close the rear cover of the option sorter Paper jam MP tray Jam at the MP Tray Appendix a Fonts PCL Scalable and Bitmap Fonts List of Fonts Font Number Font samples Font Number Font samples Kpdl Fonts Kpdl Fonts Appendix B Options Other Options Available Options Expanding the Printer Memory Following instructions are intended for the technician only Removing the Main Circuit Board Circuit board, can cause serious damage to the printer Dimm to be used Installing Dimm Removing Dimm Testing the Expansion Memory Adjusting the Memory on the Printer Driver PF-60 Paper Feeder Installing Option Units Installing Option Units Load paper DU-60 Duplexer Gently place the printer on top of the duplexer Pass the connected cable and power cord through the opening SO-60 Sorter Cord, and printer cable Push the sorter down. The levers of the attachment legs are Grip Duplexer Rear Cover Do not move or lift the printer with the sorter installed EF-60 Envelope Feeder Installing the envelope feeder on the printer Load envelopes into the envelope feeder Pull out the sub-tray that matches the size of the envelopes Paper Setting Button PT-4/PT-60 Face-up Output Tray Install the face-up output tray on the rear of the printer Network Interface Card About the modes, see Network Interface Parameters on Microdrive Hard Disk Return the main circuit board to the printer by reversing Result in the printer’s electronics or the CompactFlash card CompactFlash Memory Card Appendix C Host Computer Interface Parallel Interface Interface SignalsParallel Interface Communication Modes Pin In/out Description Parallel Connector Pin Assignment Acknowledge* nAck Pin USB Interface Specifications RS-232C Interface Interface SignalsPin In/out Signal Description Serial Interface Option RS-422A Interface SG Signal Ground Pin Serial Connector Overview of Signals RS-422ARS-422A Interface Voltage Levels Parameter value Baud rate RS-232C/RS-422A ProtocolParameter value Meaning RS-422A interface Prescribe Frpo D0 CommandSerial interface error Error not handled Error handled RS-232C Cable Connection Connecting the Printer to the ComputerObtain a Suitable RS-232C Cable RS-232C Cable Connection DOS, enter the following commands Appendix D Specifications Printing speed ResolutionDrum cleaning Printing method Operating noise Power requirementsPower consumption Pressure level at the front Dimensions Glossary Ecoprint Emulation Cassette modeFirst mode Dpi dots per inch Online Sleep modeMP tray Offline Index Index-2 Index-3 2002.2EC For FS-1900 Regarding Tradenames Preface Contents Window appears Installing the Printer DriverUsing Parallel Interface Run. Type the following in the Command Line text box Select a device model window, click FS-1900 Options Click the Next button Device connection window, select the type of connection Installing the Printer Driver Printers window Confirming the Installation Installing the Printer Driver Installing the USB Printing Support Using USB Interface Automatic search for a better driver Installing the Printer Driver for USB USB 001 Virtual printer port for USB is following port list Printers window Right click the Kyocera Mita FS-1900 KX Click the Device Settings tab Installing the Paper Feeder PF-60Adding Optional Devices Adding Optional Devices Properties Installing the Duplexer DU-60Click Duplex Unit in the Device Options list box Click Sorter Stacker in the Device Options list box Installing the Sorter SO-60 Click Envelope Feeder in the Device Options list box Installing the Envelope Feeder EF-60 Installing the Microdrive Hard Disk Click the Device Settings tab Drop down list, and click the OK button Basic Printing Task Printing from Windows ApplicationsNumber of Copies combo box Printing from Windows Applications Properties click the Media tab To set the custom size Customized Paper Sizes list Device Settings tab Cover Mode Advanced Media Settings Back Not applicable for model FS-1900 Insert You select this check box Transparency from the Media Type list Transparency Interleaving Click the Transparency Interleaving check box Printing Multiple Pages per Sheet Changing the Size of the Document If you want to set Resolution, Kyocera Image Refinement, Changing the Resolution Text is unaffected by the Grayscale Adjustment settings Adjusting Grayscale TrueType Fonts Watermark Printing Only on specified pages for Page Specification Using the Duplexer DU-60 Display the printer driver’s Properties dialog box from Using the Sorter SO-60 Printing from Windows Applications Sorter modes Sorter Mode Description MPS Code Job Temporary and Permanent Virtual Mail Box Using Job Retention Quick Copy Printing Copy Proof and Hold Printing Hold Private Printing Private Print Stored Job Printing Job Storage Storage Virtual Mailbox Printing Before Using Virtual Mailboxes Down list, and click the OK button Settings dialog box will be displayed Using VMB Printing Names Mail Box VMB Printing a Code Job Microdrive as it is printed 2002.2EC