Paper Handling
1-39
Output Stack
The following procedure allows you to select whether printouts will b e
received by the face-down output tray or to the face-up output tray. If an
option sorter is installed, it can also be selected using the manner
described below.
1Press the MENU key.
2Press the or key repeatedly until Paper Handling > appears.
3Press the > key.
4Press the or key repeatedly until >Stack Select appears.
5Press the ENTER key. A blinking question mark (?) appears.
6Press the or key to display the desired destination. The output
tray changes as shown below.
Face-down tray (Printer’s face-down output tray) [Default]
Face-up tray (Printer’s face-up output tray) [Option face-up
tray required]
7When the desired paper source displayed, press the ENTER key.
8Press the MENU key. The message display returns to Ready.
Paper Handling>
>Stack Select
Face-down tray
>Stack Select
? Face-down tray