Kyocera FS-1900 manual Print Density

Configuration

Print Density

The print density can be adjusted in five steps: from 01 (light) to 05 (dark).

The factory setting is 03.

1	Press the MENU key.
2	Press the		or	key repeatedly until Print Quality > appears.
		Print Quality >
3
	Press the > key.
4	Press the		or	key repeatedly until >Print Density appears.
		>Print Density
		03
5
	Press the ENTER key. A blinking question mark (?) appears.
		>Print Density
		? 03
6
	Select the print density from five steps from 01 (light) to 05 (dark)
	using the		or	key.
7	Press the ENTER key.
8	Press the MENU key. The message display returns to Ready.

1-95