Kyocera FS-1900 manual Quick Copy, Mps, Job Storage, Virtual Mailbox

e-MPS

Job Storage

Job storage stores print jobs either temporarily or permanently, or in virtual mailboxes, as you click an appropriate radio button on the printer driver when printing from a computer.

Virtual Mailbox

Virtual mailbox is part of Job Storage, which stores print jobs on the Microdrive without printing. It enables you to retrieve jobs later from the operator panel, or the KM-NET Job Manager utility (in the CD-ROM).

Each mailbox may be used by an individual who desires to share the printer in this mode. By default, each mailbox is numbered from ‘Tray 001,’ ‘Tray 002,’... etc. To ‘post’ a job in one of these mailboxes, you assign a numbered mailbox on the printer driver when printing.

To retrieve the stored job Mailbox (VMB) on page

for printing, see Retrieving Jobs from Virtual 1-68.

The virtual mailbox can be used in PCL 6 emulation only.

Note

Quick Copy

This mode enables you to print the requested number of copies of a job, simultaneously storing the job on the Microdrive. When additional copies are required, you can reprint the required number of copies from the printer operator panel. To print a job as a quick copy job, see Printer Driver Guide.

The default number of print jobs that can be stored on the Microdrive is 32. This value can be increased to up to 50 from the e-MPS Configuration menu. For details, see e-MPS Configuration on page 1-70. When the number of jobs reaches the limit, the oldest job will be overwritten by the new one.

When the printer is turned off, all stored jobs will be deleted.

Printing Additional Copies using Quick Copy

To print additional copies of a job stored in the printer:

1	Press the MENU key.
2	Press the or		key repeatedly until e-MPS > appears.
		e-MPS	>
3
	Press the > key.

1-57