Paper Handling
1-27
Entering the Width and Length
Then, use the following procedure to set the paper size.
1When the unit of measurement is set, press the key.
>>X Dimension appears as shown below (the paper width setting).
2Press the ENTER key. A blinking cursor ( ) appears.
3Press the or key to increase or decrease the value of the figure
where the cursor is blinking and display the desired width. The
width can be set between 148 and 216 mm (5.83 to 8.5 inches). You
can use the > and < keys to move the cursor right and left.
4Display the paper width and press the ENTER key.
5When the width is set, press the key. >>Y Dimension appears
(the paper length setting). Set the desired leng th in the same way as
the width. The length can be set between 210 and 356 mm (8.27 to
14.02 inches).
6Display the paper length, press the ENTER key.
Enter the paper size for X Dimension and Y Dimension as
shown in the figure.
X Dimension
Y Dimension
148 to 216 mm
(5.83 to 8.5 inches)
210 to 356 mm
(8.27 to 14.02 inches)

>>X Dimension

216 mm

>>X Dimension

216 mm