Kyocera FS-1900 manual Available Options, Other Options

Available Options

Available Options

1SO-60 Sorter

2PT-4/PT-60

Face-up

Output Tray

Printer

			Network
			Interface Card
		3(3.3 V DC) or
			Serial Interface
EF-60			Board Kit
4Envelope			(IB-10E)
Feeder
			DU-60
		5Duplexer
			PF-60
		6Paper Feeder
		f
	o		n
r
e		o
d		i
		t
r	a
	l
O a
	l
t
s
n
I

Printer combined with options

SO-60 Sorter

1Equipped with five trays each with 200 sheets capacity. Performs sorting, collating, and mailbox functions. Attaches to the top of the printer.

2PT-4/PT-60 Face-up Output Tray

This is a face-up tray. It attaches to the rear of the printer.

Network Interface Card (IB-21)

Enables printing from multiple computers via a network if you install the special-purpose utility KPrint. (KPrint is included in the Kyocera Mita Network Library CD-ROM

3supplied with IB-21.) For details, see Configuration Guide in the CD-ROM supplied with IB-21.

Serial lnterface Board Kit (IB-10E)

Connect to the computer’s serial printer port with a serial cable.

EF-60 Envelope Feeder

4Holds more envelopes at a time than the MP tray. It can be attached to the front of the printer after the MP tray has been removed.

DU-60 Duplexer

5Performs duplex printing for short edge and long edge binding. Attaches to the bottom of the printer.

PF-60 Paper Feeder

6Holds approximately 500 sheets of A5 to A4/Letter and Legal size paper. Up to three paper feeders can be attached to the bottom of the printer.

Other Options

•Bulk Feeder (PF-8E)

Holds approximately 2,000 sheets of A5 to A4/Letter and Legal size paper. It can be attached to the front of the printer after the MP tray has been removed.

•Bulk Stacker (HS-8E)

This bulk stacker can hold up to 2,000 copies for a continuous, voluminous output. It attaches to the rear of the printer.

•Paper Cassette (PC-60LG)

Holds A5 to A4/Letter and Legal size paper.

•Microdrive (Hard Disk Unit)

Enables the electronic sorting and job retention functions. To be inserted into the slot designed for it on the main circuit board of the printer. See your dealer for purchasing information regarding the Microdrives that are best suited for use with this printer.

•CompactFlash Card

This is a microchip card that may contain option fonts, macros, and forms. Insert the card into the card slot located near the handle on the right of the printer. See your dealer for purchasing information regarding the CompactFlash Cards that are best suited for use with this printer.

•Memory DIMM

See your dealer for purchasing information of the DIMM that are best suited for use with this printer. See Expanding the Printer Memory for the installation procedure.

B-2