e-MPS
1-70
e-MPS Configuration
You can change the following parameters for e-MPS operation:
Maximum number of Quick Copy/Proof and Hold jobs
Maximum space assigned to temporary code jobs
Maximum space assigned to permanent code jobs
Maximum space assigned to virtual mailboxes
The total amount of storage areas specified must not exceed the total
size of the Microdrive. Otherwise, you may only be able to accommodate
print jobs of a smaller amount of print jobs than specified.
Changing the Maximum Number of Quick Copy/Proof and Hold
Jobs
This changes maximum number of Quick Copy/Proof and Hold jobs from 0
to 50. The default is 32.
1Press the MENU key.
2Press the or key repeatedly until e-MPS > appears.
3Press the > key.
4Press the or key repeatedly until >e-MPS Configuration >
appears.
5Press the > key.
6Press the or key repeatedly until >>Quick Copy appears.
7Press the ENTER key. A blinking cursor ( ) appears.
Option
Note
e-MPS >
>e-MPS >
Configuration
>>Quick Copy
32
>>Quick Copy
32