Kyocera FS-1900 manual Mps, Mode Quick Copy Proof and Hold Private Print Stored Job

e-MPS

e-MPS

To use the e-MPS system, an option Microdrive must be installed in the printer.

Option

e-MPS is an abbreviation for ‘enhanced-Multiple Printing System’ which implements the following functions that are available from the printer driver:

•Job Retention

•Job Storage

In either job mode, when printing a document, the print data is transferred from the computer to the printer then stored on the printer’s Microdrive. Since copies of the document are printed using the stored data, printing is performed faster with less computer spooling time and less network traffic.

Job Retention

Job Retention has four modes as summarized below. These modes are selected when you choose on the printer driver through the application software:

Mode	Quick Copy	Proof and Hold	Private Print	Stored Job
Primary function	To later print	To proof the first copy	To hold the document	To electronically
	additional copies	before printing	in printer to prevent	store documents
		multiple copies	unauthorized access	such as fax cover
				pages
Storing started	Printer driver	Printer driver	Printer driver	Printer driver
Retrieved by	Operator panel	Operator panel	Operator panel	Operator panel
Default number of	Same as storing	One less	Same as storing	One
copies printed at
retrieval
Maximum number of	32, expandable to 50	32, expandable to 50	Private jobs are	Depends on the
jobs stored*			deleted	capacity of
			automatically once it	Microdrive.
			is retrieved.
PIN security	No	No	Yes	Yes (Option)
Data after printing	Stored	Stored	Stored	Stored
Data at power off	Deleted	Deleted	Deleted	Stored
Microdrive	Yes	Yes	Yes	Yes
required**

*Jobs in excess will cause the earlier ones to be deleted.

**RAM disk does not work for e-MPS.

1-56