Operating the Storage Device
1-82
3The default setting is Off. Press the ENTER key. A blinking question
mark (?) appears. Select On using the or key, and then press the
ENTER key.
4Press the > key to display >RAM Disk Size.
5Press the ENTER key again, and change the RAM disk size using the
or key. It is not possible to make a setting that exc eeds total
printer memory. The default value for the RAM disk is the total
printer memory minus 9 MB. This parameter may be set anywhere
from 0001 to 1024 depending on the available printer memory.
6When the desired RAM disk size is displayed, press the ENTER key.
7Press the MENU key and restart the printer. The setting will be
activated after restart.
RAM Disk Mode
? On
>RAM Disk Size
0007 Mbyte