Kyocera FS-1900 manual Paper Handling, Custom Paper Size

Paper Handling

Custom Paper Size

In addition to the standard sizes A5, A4, B5, Letter, and Legal (for U. S. A. only) size for the paper cassette, paper of other sizes can be fed as custom sizes. When placing paper of sizes other than A5, A4, B5, Letter, or Legal (for U. S. A. only) into the paper cassette, set the size of the paper to be used into the printer by following the procedure given below. If an option paper feeder (PF-60) is installed, custom sizes for its paper cassette can be set using the same procedure.

This menu appears when the paper size dial of the paper cassette is set to

CUSTOM.

Properly set the paper into the paper cassette. For details about the adjustment of the paper guides and paper stopper inside the paper cassette, see the Installation Guide supplied with the printer.

Setting Paper Size Dial

Use the following procedure to set the paper size dial to CUSTOM.

1	Pull out the paper cassette from the printer and turn the paper size
	dial to CUSTOM. See step 1 in Setting the Paper Size in Paper
	Cassette.
2	Adjust the paper guides and paper stopper inside the paper cassette
	to the size of the paper to be used and load the paper into the

cassette.

When using non-standard size paper, read the next section to set the paper size from the operator panel.

Setting a custom size from the Operator Panel

Set the size of the paper loaded in the paper cassette into the printer from the printer operator panel.

1

2

3

Press the MENU key.

Press the or key repeatedly until Paper Handling > appears.

Paper Handling >

Press the > key.

1-25