Lantronix LX6 Arp config-arp level commands, Add IP address MAC address, Remove ip IP address

	5: Commands and Levels
password	Enters the next lower level.
protocol tcp	Uses TCP protocol for accept mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for accept mode
	tunneling.
protocol telnet	Uses Telnet protocol (with IAC) for accept mode tunnel-
	ing.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show status	Displays tunnel accept status.
start character <control>	Sets the accept mode start character.
	The character may be input as text, control, decimal, or
	hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
tcp keep alive <milliseconds>	Enables TCP keep alive for accept mode tunneling and
	sets the timer.
	<milliseconds> = timer value, in milliseconds.
write	Stores the current configuration in permanent memory.
arp (config-arp) level commands
add <IP address> <MAC address>	Adds an entry to the ARP table, mapping an IP address to
	a MAC address.
	<ip address> = IP address to be mapped.
	<mac address> = MAC address in colon-separated form.
clrscrn	Clears the screen.
exit	Exits to the configuration level.
remove all	Removes all entries from the ARP cache.
remove ip <IP address>	Removes an entry from the ARP cache.
	<ip address> = address of the entry being removed.
show cache	Displays the ARP cache table.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
cli (config-cli) level commands
clrscrn	Clears the screen.
default inactivity timeout	The default inactivity timeout will apply to CLI sessions.
default login password	Restores the default CLI login password.
default quit connect line	Restores the default string to quit the "connect line",
	"telnet", and "ssh" commands.
enable level password <text>	Sets the enable-level password.
exit	Exits to the configuration level.
inactivity timeout <minutes>	Sets the inactivity timeout for all CLI sessions.
line authentication disable	No password required for Line CLI users.
line authentication enable	Challenges the Line CLI user with a password.
login password <text>	Sets the CLI login password.
no enable level password	Removes the enable-level password.
no inactivity timeout	No inactivity timeout will apply to CLI sessions.

XPort® Pro Lx6 Embedded Device Server Command Reference 41