5: Commands and Levels
|
|
| bytes. |
|
|
| Each byte is represented by a single character. |
|
|
| Note that quotes must enclose the value if it contains |
|
|
| spaces. |
| auto show statistics |
| show connection statistics |
| clrscrn |
| Clears the screen. |
| default protocol |
| Restores the default protocol as "TCP". |
| default tcp keep alive |
| Restores the default 45 second connect mode TCP keep |
|
|
| alive timeout. |
| exit |
| Exits to the next higher level. |
| no address |
| Removes the remote host address used to establish tun- |
|
|
| neling connections. |
| no aes decrypt key |
| Removes the connect tunnel AES decrypt key. |
| no aes encrypt key |
| Removes the connect tunnel AES encrypt key. |
| no port |
| Removes the remote port used to establish tunnel con- |
|
|
| nections. |
| no tcp keep alive |
| Disables the connect mode TCP keep alive timeout. |
| port <number> |
| Sets the remote port to use for connect mode tunneling. |
|
|
| <number> = number of the port to use. |
| protocol tcp |
| Uses TCP protocol for connect mode tunneling. |
| protocol tcp aes |
| Uses TCP protocol with AES encryption for connect mode |
|
|
| tunneling. |
| protocol telnet |
| Uses Telnet protocol (with IAC) for connect mode tunnel- |
|
|
| ing. |
| protocol udp |
| Uses UDP protocol for connect mode tunneling. |
| protocol udp aes |
| Uses UDP protocol with AES encryption for connect mode |
|
|
| tunneling. |
| show |
| Shows the current configuration. |
| show history |
| Displays the last 20 commands entered during the current |
|
|
| CLI session. |
| show statistics |
| show connection statistics |
| tcp keep alive <milliseconds> |
| Enables TCP keep alive for connect mode tunneling and |
|
|
| sets the timer. |
|
|
| <milliseconds> = timer value, in milliseconds. |
| write |
| Stores the current configuration in permanent memory. |
| host 5 |
|
|
| address <text> |
| Sets the remote host to establish tunneling connections |
|
| ||
|
|
| with. |
|
|
| <text> = IP address or host name of the remote host. |
| aes decrypt key <hexadecimal> |
| Sets the connect tunnel AES decrypt key with up to 16 |
|
|
| bytes. |
|
|
| Each byte is represented by two adjacent hex digits. |
|
|
| Bytes may run together or be separated by optional punc- |
|
|
| tuation: |
|
|
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
|
|
| Note that quotes must enclose the value if it contains |
|
|
| spaces. |
| aes decrypt key text <text> |
| Sets the connect tunnel AES decrypt key with up to 16 |
|
|
| bytes. |
|
|
| Each byte is represented by a single character. |
|
|
| Note that quotes must enclose the value if it contains |
XPort® Pro Lx6 Embedded Device Server Command Reference | 68 |
