4: Configuration Using XML
Importing
The following syntax can be used to import configurations from a file:
xcr import <file>
xcr import <file> <groups and/or group:instances>
The first line imports all groups specified in the XML config record named in <file>. Any filename is valid, and the file name and extension are not important.
In the second line:
Instance follows group with a colon (see the third example on the next page).
Multiple groups are separated with a comma.
Any white space requires the list of groups to be quoted.
Only the named groups get imported, even if the XCR contains additional XCR groups.
The following syntax can be used to export configurations to a file on the device server's file system:
xcr export <file>
xcr export <file> <groups and/or group:instances>
The same guidelines above regarding importing configurations also apply to exporting configurations. If no groups are specified, then the export command will export all configuration settings to the file. If instances are specified after the groups, only those group instances are written. If no instance is specified, all instances of that group are written.
Exporting
The following example exports only the accept mode tunneling settings for 1 to the file "tunnel_1.xcr" on the device server filesystem:
xcr export tunnel_1.xcr "tunnel accept:1"
The following example exports only the mode tunneling settings for all to the file "tunnel_all.xcr" on the device server filesystem:
xcr export tunnel_all.xcr "tunnel "
The following example imports only the settings for 2 from an XCR named "factory_config.xcr" on the device server filesystem. If "factory_config.xcr" has other configuration settings, they are ignored:
xcr import factory_config.xcr ":2"
The following example imports only settings for all from a configuration record on the device server filesystem named "foobar.xcr":
xcr import foobar.xcr ""
To import only mode tunnel settings for 1 and all settings for 2 from an XML configuration record named "production.xcr" that contains these settings (and possibly more), issue the following command:
xcr import production.xcr "tunnel :1"
The following example exports mode tunneling for all to the file tunnel_config.xcr on the device server filesystem:
xcr export tunnel_config.xcr "tunnel"
XPort® Pro Lx6 Embedded Device Server Command Reference | 19 |
