Lantronix LX6 manual Root level commands, Serial tunnel-serial1 level commands

	5: Commands and Levels
	unchallenged.
password <text>	Sets the password required on the network side of the
	tunnel to begin
	a connection.
prompt disable	Inhibits any prompting for password on the network side
	of the tunnel.
prompt enable	Sets up so a user on the network side of the tunnel will be
	prompted for
	a password.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
root level commands
clrscrn	Clears the screen.
enable	Enters the enable level.
exit	Exit from the system
iperf <params>	Run iperf with command line parameters passed in quot-
	ed string.
ping <host>	Ping destination continuously with 5 second timeout
ping <host> <count>	Ping destination n times with 5 second timeout
ping <host> <count> <timeout>	Ping destination n times with x timeout (in seconds)
ping6 <host>	Ping IPv6 destination continuously with 5 second timeout
ping6 <host> <count>	Ping IPv6 destination n times with 5 second timeout
ping6 <host> <count> <timeout>	Ping IPv6 destination n times with x timeout (in seconds)
show	Show system information
show history	Displays the last 20 commands entered during the current
	CLI session.
trace route <host>	Trace route to destination
trace route <host> <protocol>	Trace route to destination using TCP, ICMP, or UDP
serial (tunnel-serial:1) level commands
clrscrn	Clears the screen.
default dtr	Restores default DTR control, asserted while connected.
dtr asserted while connected	Asserts DTR whenever a connect or accept mode tunnel
	connection is active.
dtr continuously asserted	Asserts DTR regardless of any connections.
dtr truport	Asserts DTR to match remote DSR when connected via
	Telnet.
dtr unasserted	Does not assert DTR.
exit	Returns to the tunnel level.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
smtp (config-smtp) level commands
clrscrn	Clears the screen.
default relay port	Restores the SMTP relay port to its default.

XPort® Pro Lx6 Embedded Device Server Command Reference 82