| 5: Commands and Levels |
|
|
|
|
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
|
|
| |
| Note that quotes must enclose the value if it contains |
|
| spaces. |
|
aes decrypt key text <text> | Sets the connect tunnel AES decrypt key with up to 16 |
|
| bytes. |
|
| Each byte is represented by a single character. |
|
| Note that quotes must enclose the value if it contains |
|
| spaces. |
|
aes encrypt key <hexadecimal> | Sets the connect tunnel AES encrypt key with up to 16 |
|
| bytes. |
|
| Each byte is represented by two adjacent hex digits. |
|
| Bytes may run together or be separated by optional punc- |
|
| tuation: |
|
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
|
| Note that quotes must enclose the value if it contains |
|
| spaces. |
|
aes encrypt key text <text> | Sets the connect tunnel AES encrypt key with up to 16 |
|
| bytes. |
|
| Each byte is represented by a single character. |
|
| Note that quotes must enclose the value if it contains |
|
| spaces. |
|
auto show statistics | show connection statistics |
|
clrscrn | Clears the screen. |
|
default protocol | Restores the default protocol as "TCP". |
|
default tcp keep alive | Restores the default 45 second connect mode TCP keep |
|
| alive timeout. |
|
exit | Exits to the next higher level. |
|
no address | Removes the remote host address used to establish tun- |
|
| neling connections. |
|
no aes decrypt key | Removes the connect tunnel AES decrypt key. |
|
no aes encrypt key | Removes the connect tunnel AES encrypt key. |
|
no port | Removes the remote port used to establish tunnel con- |
|
| nections. |
|
no tcp keep alive | Disables the connect mode TCP keep alive timeout. |
|
port <number> | Sets the remote port to use for connect mode tunneling. |
|
| <number> = number of the port to use. |
|
protocol tcp | Uses TCP protocol for connect mode tunneling. |
|
protocol tcp aes | Uses TCP protocol with AES encryption for connect mode |
|
| tunneling. |
|
protocol telnet | Uses Telnet protocol (with IAC) for connect mode tunnel- |
|
| ing. |
|
protocol udp | Uses UDP protocol for connect mode tunneling. |
|
protocol udp aes | Uses UDP protocol with AES encryption for connect mode |
|
| tunneling. |
|
show | Shows the current configuration. |
|
show history | Displays the last 20 commands entered during the current |
|
| CLI session. |
|
show statistics | show connection statistics |
|
tcp keep alive <milliseconds> | Enables TCP keep alive for connect mode tunneling and |
|
| sets the timer. |
|
| <milliseconds> = timer value, in milliseconds. |
|
XPort® Pro Lx6 Embedded Device Server Command Reference | 63 |