| 5: Commands and Levels |
|
|
clrscrn | Clears the screen. |
connect mode always | Enables the tunneling server to always establish tunneling |
| connections. |
connect mode any character | Enables the tunneling server to establish a tunneling con- |
| nection when a |
| character is received on the corresponding line (serial |
| port). |
connect mode disable | Disables connect mode tunneling. |
connect mode modem control asserted | Enables the tunneling server to make tunneling connec- |
| tions when the modem |
| control pin is asserted. |
connect mode modem emulation | Enables modem emulation for connect mode tunneling. |
connect mode start character | Enables connect mode tunneling when the configured |
| start character |
| is received on the line. |
cp output | Enters the next lower level. |
default connect mode | Restores the default connect mode as "disable". |
default host mode | Connects to the first host in the list that accepts the con- |
| nection. |
default local port | Uses a random port number as the local port for establish- |
| ing tunneling |
| connections to other devices. |
default reconnect time | Restores the default reconnect time value for connect |
| mode tunneling. |
default start character | Defaults the connect mode start character. |
email connect <number> | Sets an email profile to use to send an email alert upon |
| establishing |
| a connect mode tunnel. |
| <number> = the number of the email profile to use. |
email disconnect <number> | Sets an email profile to use to send an email alert upon |
| closing |
| a connect mode tunnel. |
| <number> = the number of the email profile to use. |
exit | Returns to the tunnel level. |
flush serial disable | Characters already in the serial data buffer are retained |
| upon establishing |
| a connect mode tunneling connection. |
flush serial enable | Flushes the serial data buffer upon establishing a connect |
| mode tunneling |
| connection. |
flush start character disable | Enables forwarding of the connect start character into the |
| network. |
flush start character enable | Disables forwarding of the connect start character into the |
| network. |
host <instance> | Enters the next lower level. |
| Specify the instance for the next lower level. |
host mode sequential | Connects to the first host in the list that accepts the con- |
| nection. |
host mode simultaneous | Selects simultaneous connections to all hosts on the host |
| list. |
kill connection | Disconnects the active connect mode tunneling connec- |
| tion or connections. |
XPort® Pro Lx6 Embedded Device Server Command Reference | 43 |
