Lantronix LX6 manual Host 7 tunnel-connect-host17 level commands

	5: Commands and Levels
	sets the timer.
	<milliseconds> = timer value, in milliseconds.
write	Stores the current configuration in permanent memory.
host 7 (tunnel-connect-host:1:7) level commands
address <text>	Sets the remote host to establish tunneling connections
	with.
	<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.
aes decrypt key text <text>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains
	spaces.
aes encrypt key <hexadecimal>	Sets the connect tunnel AES encrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.
aes encrypt key text <text>	Sets the connect tunnel AES encrypt key with up to 16
	bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains
	spaces.
auto show statistics	show connection statistics
clrscrn	Clears the screen.
default protocol	Restores the default protocol as "TCP".
default tcp keep alive	Restores the default 45 second connect mode TCP keep
	alive timeout.
exit	Exits to the next higher level.
no address	Removes the remote host address used to establish tun-
	neling connections.
no aes decrypt key	Removes the connect tunnel AES decrypt key.
no aes encrypt key	Removes the connect tunnel AES encrypt key.
no port	Removes the remote port used to establish tunnel con-
	nections.
no tcp keep alive	Disables the connect mode TCP keep alive timeout.
port <number>	Sets the remote port to use for connect mode tunneling.
	<number> = number of the port to use.
protocol tcp	Uses TCP protocol for connect mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for connect mode
	tunneling.
protocol telnet	Uses Telnet protocol (with IAC) for connect mode tunnel-
	ing.

XPort® Pro Lx6 Embedded Device Server Command Reference 71