| 5: Commands and Levels |
|
|
| spaces. |
auto show statistics | show connection statistics |
clrscrn | Clears the screen. |
default protocol | Restores the default protocol as "TCP". |
default tcp keep alive | Restores the default 45 second connect mode TCP keep |
| alive timeout. |
exit | Exits to the next higher level. |
no address | Removes the remote host address used to establish tun- |
| neling connections. |
no aes decrypt key | Removes the connect tunnel AES decrypt key. |
no aes encrypt key | Removes the connect tunnel AES encrypt key. |
no port | Removes the remote port used to establish tunnel con- |
| nections. |
no tcp keep alive | Disables the connect mode TCP keep alive timeout. |
port <number> | Sets the remote port to use for connect mode tunneling. |
| <number> = number of the port to use. |
protocol tcp | Uses TCP protocol for connect mode tunneling. |
protocol tcp aes | Uses TCP protocol with AES encryption for connect mode |
| tunneling. |
protocol telnet | Uses Telnet protocol (with IAC) for connect mode tunnel- |
| ing. |
protocol udp | Uses UDP protocol for connect mode tunneling. |
protocol udp aes | Uses UDP protocol with AES encryption for connect mode |
| tunneling. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show statistics | show connection statistics |
tcp keep alive <milliseconds> | Enables TCP keep alive for connect mode tunneling and |
| sets the timer. |
| <milliseconds> = timer value, in milliseconds. |
write | Stores the current configuration in permanent memory. |
host 14 |
|
address <text> | Sets the remote host to establish tunneling connections |
| with. |
| <text> = IP address or host name of the remote host. |
aes decrypt key <hexadecimal> | Sets the connect tunnel AES decrypt key with up to 16 |
| bytes. |
| Each byte is represented by two adjacent hex digits. |
| Bytes may run together or be separated by optional punc- |
| tuation: |
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
| Note that quotes must enclose the value if it contains |
| spaces. |
aes decrypt key text <text> | Sets the connect tunnel AES decrypt key with up to 16 |
| bytes. |
| Each byte is represented by a single character. |
| Note that quotes must enclose the value if it contains |
| spaces. |
aes encrypt key <hexadecimal> | Sets the connect tunnel AES encrypt key with up to 16 |
| bytes. |
XPort® Pro Lx6 Embedded Device Server Command Reference | 61 |
