Lantronix LX6 manual CLI Level Hierarchy

3: Command Line Interface

An overview of the levels in the XPort Pro Lx6 embedded device server is presented in Figure 3-2 CLI Level Hierarchy below.

Figure 3-2 CLI Level Hierarchy

(login) enable

configure

cpm

device

dns

email <number>

filesystem

line <line>

tunnel <line>

xml

cp

accept

connect

disconnect

modem

packing

serial

cp output

password

cp output

host

<number>

arp
cli	telnet
diagnostics	log
discovery
ftp
http
icmp
icmpv6
if 1	ethernet
	link
ip
smtp
syslog
terminal
<line>
terminal
network

Commands at the login level (see Figure 3-3 Login Level Commands below) do not affect current configuration settings and are not displayed initially. If you type ?, you will see the login sub- commands. These commands provide diagnostic and status information only.

Figure 3-3 Login Level Commands
>
>?
clrscrn	exit
iperf <params>	ping <host>
ping <host> <count>	ping <host> <count> <timeout>
ping6 <host>	ping6 <host> <count>
ping6 <host> <count> <timeout>	show
show history	trace route <host>
trace route <host> <protocol>	enable

Note: To configure the XPort Pro Lx6 embedded device server, you must be in the enable level and any of its sub-levels. Figure 3-4below shows the enable level commands.

XPort® Pro Lx6 Embedded Device Server Command Reference 12