| 5: Commands and Levels |
|
|
show history | Displays the last 20 commands entered during the current |
| CLI session. |
speed 10 | Sets the speed of the Ethernet link to 10 Mbps. |
speed 100 | Sets the speed of the Ethernet link to 100 Mbps. |
speed auto | Sets the speed of the Ethernet link to |
write | Stores the current configuration in permanent memory. |
log |
|
clrscrn | Clears the screen. |
default max length | Restores the factory default maximum Log file size. |
default output | Restores the default log output, which is disable. |
exit | Exits to the next higher level. |
max length <Kbytes> | Sets the maximum size in Kbytes for the Log file. |
output disable | Disables log output. |
output filesystem | Enables log to filesystem. |
output line <number> | Enables log to serial line. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
modem |
|
clrscrn | Clears the screen. |
connect string <text> | Sets the CONNECT string used in modem emulation. |
| <string> = connect string. |
default incoming connection | Default disables incoming network connections. |
default response type | Default uses text type responses. |
display remote ip disable | The incoming RING has nothing following it. |
display remote ip enable | The incoming RING is followed by the IP address of the |
| caller. |
echo commands disable | Does not echo modem commands. |
echo commands enable | Echoes modem commands. |
echo pluses disable | Does not echo the +++ characters when entering modem |
| command mode. |
echo pluses enable | Echoes the +++ characters when entering modem com- |
| mand mode. |
error unknown commands disable | Returns OK on unknown AT commands. |
error unknown commands enable | Returns an error upon unknown AT commands. |
exit | Returns to the tunnel level. |
incoming connection automatic | Automatically answer incoming network connections. |
incoming connection disabled | Disable incoming network connections. |
incoming connection manual | Wait for an ATA command before answering an incoming |
| network connection. |
no connect string | Removes optional CONNECT string information for mo- |
| dem emulation. |
reassert | Asserts tunnel modem status with current configured val- |
| ues. |
response type numeric | Uses numeric type responses. |
XPort® Pro Lx6 Embedded Device Server Command Reference | 80 |
