Lantronix LX6 manual Device device level commands, Diagnostics config-diagnostics level commands

	5: Commands and Levels
enable <group>	Enables a disabled group.
	<group> = the name of the group.
exit	Exits to the enable level.
get <group>	Displays the value of the specified group.
	<group> = the name of the group.
set <cp> as input	Configures a CP as an asserted high input.
	<cp> = configurable pin.
set <cp> as input assert low	Configures a CP as an asserted low input.
	<cp> = configurable pin.
set <cp> as output	Configures a CP as an asserted high output.
	<cp> = configurable pin.
set <cp> as output assert low	Configures a CP as an asserted low output.
	<cp> = configurable pin.
set <group> <value>	Assigns a value to the specified group.
	<group> = the name of the group.
	<value> = numeric value to assign to the CP group. Can
	be specified as hex
	if prepended with “0x”.
show <group>	Displays group information for specified group.
	<group> = the name of the group.
show cp	Displays configuration and group information for all CPs.
show groups	Displays all groups defined and their state.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
device (device) level commands
auto show tlog	Continuously displays the internal trouble log.
clrscrn	Clears the screen.
exit	Exit to the enable level.
show	Show system information
show hardware information	Displays information about the hardware.
show history	Displays the last 20 commands entered during the current
	CLI session.
show memory	Displays current memory usage information.
show task state	Displays current task states.
show tlog	Displays the internal trouble log.
write	Stores the current configuration in permanent memory.
diagnostics (config-diagnostics) level commands
clrscrn	Clears the screen.
exit	Returns to the config level.
log	Enters the next lower level.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
disconnect (tunnel-disconnect:1) level commands
clrscrn	Clears the screen.
exit	Returns to the tunnel level.

XPort® Pro Lx6 Embedded Device Server Command Reference 47